Get ready for some real power on a tiny scale.
These 803 brushless motors are very, very fast, meant to push the limits of power on the 65mm frame size.
First of all, why use such a fast brushless motor for 65mm builds? The answer is transient response. These motors prouduce about the exact same amount of thrust as the much lighter 802 22,000kv Deuce Juice motors, but they get up to speed much faster. They let you move all that air much more quickly than 802 motors. But they're also harder on batteries! These motors have to be used with a timer, and depending on the setup you may get as little as 90 seconds of flight time, tho with a 333mah HV battery you might expect two full minutes of intense flight. These motors are NOT for everyone, but if you're looking to max out pure raw power on this scale, this is the motor for you.
Introducing Tiny Whoop Onesies!
Tiny Whoop Onesies are the latest evolution in micro brushless motors! This new design was created to maximize durability. I know it sounds pretty cheesy but this new design is truly revolutionary.
Until now nearly all micro brushless motors were made with the bell in two pieces: the top (which is made of aluminium) and the cylindrical iron sides of the bell, which were both glued and press-fit together. Because this original design was not meant for Tiny Whoop style flight, it was susceptible to pulling apart, rendering the motors largely unusable. I found this happening especially if your aircraft was ‘ground-pounding’ or flying a racecourse that uses a slide or other touch-and-go elements.
Tiny Whoop Onesies have a single piece of aluminum that encases the entire bell, and in all my extensive tests, I have never been able to separate it as nearly all of its predecessors are would have.
This is pretty much the last piece of the puzzle when it comes to the Tiny Whoop Recipe and extreme durability. For a time now we have had access to extremely durable frames, props that seldom break, the best batteries in the world, and reliable flight controllers. Extremely reliable, durable motors are the last piece of the puzzle.
PCB Solder Pads
Like all of our brushless motors, these babies now feature the PCB Solder pad upgrade, which allows for custom wiring and easy repairs. To access the PCB pads (where the wires connect to the motor) just peel back the black silicone.
These 803 size motors also use a real bearing, not a bushing. This adds a little weight, but makes up for it in power. The bearing also adds to the lifetime of the motor.