{"title":"Replacement and Upgrade Parts","description":"Frames, Props, Flight Controllers and more.","products":[{"product_id":"vas-left-hand-airblade-antenna-upgrade","title":"VAS Left-Hand Airblade Antenna Upgrade","description":"\u003cp\u003eThe  Left-hand Circular Polarized Airblade antenna by Video Aerial Systems for the Tiny Whoop!\u003c\/p\u003e\n\u003cp\u003eThe Airblade has 5 lobes instead of 3 - making it a touch heavier but with a much higher axial ratio and a higher gain. For those willing take on the added weight of 2 antenna lobes, the reward will be the best video signal a Tiny Whoop can transmit. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVideo Aerial Systems has by far the highest quality control in the market, and tests each antenna individually. These antennas are made of bent wire, as opposed to the stamped metal antennas that come with most Tiny Whoop antennas. They are slightly larger than the stock antennas to make them a true 5.8GHz antenna, and they are considerably more durable - normal crashes will no longer break the lobe where it meets the mast.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003eWhen I modded my cam to use this antenna I added 0.766g overall. With upgraded motors, this is an excellent option for those dedicated to making Tiny Whoop videos, those flying in difficult RF environments, and for those looking for the clearest picture for the most immersive Tiny Whoop experience. \u003c\/p\u003e\n\u003cp\u003eModifying the antenna is pretty easy.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eHere's how:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14489582_10210319009747684_1050735765_o_large.jpg?v=1475361343\" alt=\"\" width=\"475\" height=\"355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirst, de-solder the current antenna from the vtx. Take a look at how it's held on in three places - there are two outside connections which are the ground (soldered to the same pad on either side) and there is a single lower connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14522529_10210319006867612_9977937_o_large.jpg?v=1475361147\" alt=\"\" width=\"475\" height=\"357\"\u003e\u003c\/p\u003e\n\u003cp\u003eNow we'll make the upgrade antenna look like that. First cut your antenna about this short. If you want a little room to make mistakes, go a couple millimeters longer.\u003c\/p\u003e\n\u003cp\u003eGently remove the outermost translucent material to expose the woven ground wire. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/Untitled_large.png?v=1475362681\" alt=\"\" width=\"475\" height=\"316\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce the outermost translucent layer is removed, slowley pull apart the woven ground wire and twist it into the two outside connections. As you'll see these will need to be a bit shorter than the central wire. Remove a bit of the white insulation between the core wire and the woven ground wire so that it looks like this.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14536493_10210319005547579_1443663104_o_large.jpg?v=1475363176\" alt=\"\" width=\"475\" height=\"341\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow just solder the central wire to the lower pad and the two ground twists to the ground pad. Easy as pie!! Just make sure they're not touching in any place and you should be good.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":26907557697,"sku":"ANT39","price":13.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14513783_10157492341905371_1068630106_o.jpg?v=1492190797"},{"product_id":"tiny-whoop-balloon-gates-kit","title":"Tiny Whoop Balloon Gates Kit","description":"\u003cp\u003eI'm bringing balloon gates back! I first discovered this little portable race kit in 2016, when i made the video below, but these babies are even more relevent today! It's the perfect tool for a quick hotel room course or a large 3d freestyle element. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese balloons blow up to 2\" x 60\" in about two seconds with the provided dual-action pump. I use a little bit of painters tape to stick the ends together and to stick the rings to the ceiling, walls, floor, pets, anything. You can also get creative and twist the ends together to make large geometric shapes like cubes, pyramids, etc. I've made some amazing 3-dimensional structures that provide perfect training grounds for all kinds of maneuvers. I am so excited to see what racecourses our amazing community comes up with!\u003c\/p\u003e\n\u003cp\u003eThis kit includes 100 of the perfect size balloons and the best hand-pump that makes it super easy to construct an excellent course very quickly.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/dtkb8DzRc-g\" height=\"315\" width=\"560\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eIf you don't have any blue painter's tape there are a few rolls for sale \u003ca href=\"https:\/\/tiny-whoop.myshopify.com\/products_preview?cache=false\u0026amp;preview_key=d9a899af3a2304e7f351a71e84a3ff03\u0026amp;variant=26911062401\"\u003eHere\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tiny Whoop","offers":[{"title":"Default Title","offer_id":26911063361,"sku":"BALOONGATES","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14555870_10157493649720371_1793332820_n.jpg?v=1492190708"},{"product_id":"tiny-whoop-special-sauce-edition-motors","title":"Special Sauce Motors - 6x15mm 17300kv","description":"\u003ch1 style=\"text-align: center;\"\u003e\u003cem\u003e\u003cstrong\u003eThe Special Sauce \u003c\/strong\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cem\u003eThis Motor was the GO-TO motor for anyone on the Tiny Whoop scene in 2016 and part of 2017. I still have a few of these around, but this product is almost always going to be SOLD OUT. This page will be left on the website as a memento to a mostly-extinct important step in the long road that brought Tiny Whoop technology to the place it is today. Here's the original description:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWhen I found this motor I switched most of my Whoops over to them. At 17300kv these motors are considerably more powerful than almost all of the motors used for upgrading Tiny Whoop style aircraft. If you're flying a stock board, these are the fastest motors you can fly without encountering considerable oscilations. You'll feel the difference these motors make when you're punching out or when you're making important corrections in race situations. They haul.\u003c\/p\u003e\n\u003cp\u003eOn a clean setup i'm getting between 3-5 minutes of hard-core heart-pounding flying with the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/batteries\/products\/copy-of-mylipo-255mah-25c-1s-battery-with-pw-connector-for-the-tiny-whoop\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e255mah Tiny Whoop HV Batteries\u003c\/a\u003e. Enough time to win most races or to tame the vast, dynamic terrain that is your home.\u003c\/p\u003e\n\u003cp\u003eIf you're flying a \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/parts-and-accessories\/products\/beebrainv1?variant=23506352193\"\u003eBeeBrain\u003c\/a\u003e or other betaflight flight controller you should consider the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/motors\/products\/mmw-6x15mm-motor-speed-insane-set-of-4?variant=22561926017\"\u003eInsane Motors\u003c\/a\u003e, which are even more powerful but oscillate very badly on boards that cannot be tuned to them. \u003c\/p\u003e\n\u003cp\u003e6mm x 15mm brushed coreless motors for the Blade Inductrix and Nano QX. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo get the most out of these motors I recommend you break them in by hovering for 10 minutes of flight time. Then go nuts.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chaoli","offers":[{"title":"Default Title","offer_id":27062048385,"sku":"M401","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/Special_Sauce.jpg?v=1529662036"},{"product_id":"propeller-set-yellow-props","title":"BLADE 31mm 4-blade 0.8mm Shaft - Yellow","description":"\u003cp\u003eThese are the props that come with the Inductrix FPV - just like the original props but Yellow!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese props are made to fit motors with 0.75-0.8mm shafts.\u003c\/span\u003e\u003c\/p\u003e","brand":"Extinct","offers":[{"title":"Yellow","offer_id":27158605633,"sku":"PX022","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/image_3ec2f910-ab85-48f6-9c50-2e00603ea3bc.jpg?v=1528449933"},{"product_id":"vas-rhcp-tiny-whoop-edition-ultra-light-cloverleaf-antenna-ugrade","title":"VAS RHCP Tiny Whoop Edition Ultra-Light Cloverleaf Antenna Ugrade","description":"\u003cp\u003eThis was a custom, exclusive product created by the industry leader in FPV antennas specifically for tinywhoop.com and the Tiny Whoop aircraft.\u003c\/p\u003e\n\u003cp\u003eThis antenna is hand-made and hand-tested by the professionals at Video Aerial Systems. Made from bent wire as opposed to the popular stock stamped metal antenna, it is incredibly durable and will be very hard to break. When I made my FPV setup in the photo below the total weight addition was 0.227 grams, a great trade-off for the huge increase in quality and durability. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eModifying your antenna is pretty easy.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere's how:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14489582_10210319009747684_1050735765_o_large.jpg?v=1475361343\" alt=\"\" width=\"475\" height=\"355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirst, de-solder the current antenna from the vtx. Take a look at how it's held on in three places - there are two outside connections which are the ground (soldered to the same pad on either side) and there is a single lower connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14522529_10210319006867612_9977937_o_large.jpg?v=1475361147\" alt=\"\" width=\"475\" height=\"357\"\u003e\u003c\/p\u003e\n\u003cp\u003eNow we'll make the upgrade antenna look like that. First cut your antenna about this short. If you want a little room to make mistakes, go a couple millimeters longer.\u003c\/p\u003e\n\u003cp\u003eGently remove the outermost translucent material to expose the woven ground wire. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/Untitled_large.png?v=1475362681\" alt=\"\" width=\"475\" height=\"316\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce the outermost translucent layer is removed, slowley pull apart the woven ground wire and twist it into the two outside connections. As you'll see these will need to be a bit shorter than the central wire. Remove a bit of the white insulation between the core wire and the woven ground wire so that it looks like this.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14536493_10210319005547579_1443663104_o_large.jpg?v=1475363176\" alt=\"\" width=\"475\" height=\"341\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow just solder the central wire to the lower pad and the two ground twists to the ground pad. Easy as pie!! Just make sure they're not touching in any place and you should be good.\u003c\/span\u003e\u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":27421351809,"sku":"ANT40","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14647372_10157539108510371_478653991_o.jpg?v=1492190815"},{"product_id":"tbs-triumph-antenna-sma","title":"TBS Triumph Antenna RHCP\/LHCP SMA","description":"\u003cp\u003eIn all my whoopings, this antenna has stood out as having the best reception I've seen when used on your goggles or video receiver. Whenever I fly I try to have another set of goggles or a screen to make friends and show off, and if i'm using a Triumph (and I always do) and my \"passengers\" use any other antenna, they are always astonished that I can stay in the air in spite of losing video at longer ranges. The truth is I have much, much better video with this antenna than all other antennas, save the very high-end antennas like the pepper-box.\u003c\/p\u003e\n\u003cp\u003eThese antennas sell everywhere on the internet in sets of 2 for 40 bucks. Because Tiny Whoop pilots need only one antenna (for the goggles or reciever\/groundstation) I requested permission to sell them indivudually at half the cost of the set- hence the 20 bucks per antenna.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHere's what Team Black Sheep has to say about this little gem:\u003c\/p\u003e\n\u003cp\u003eWhile other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep have come together to re-invent how the modern 5.8 circular polarized antenna should look and perform.\u003c\/p\u003e\n\u003cp\u003eIn our quest for the cleanest video signal and best range possible, we have ventured way beyond the traditional bent lobes of Cloverleaf designs and invested significant time and effort in finding the best antenna designs known to man, and modifying them specifically for FPV use. \u003c\/p\u003e\n\u003cp\u003eAfter extensive design and testing, we focused on making  sure the Triumph was durable enough to take even the toughest of abuse. After many test flights and extensive feedback from our pilots, we decided to use a double-jacket heavy duty Semi-Rigid cable and tin-plated connectors. For protection we created a special foam-filled and ultrasonic welded enclosure to secure the antenna from inbound trees, or other objects :)\u003c\/p\u003e\n\u003ch1\u003eFEATURES:\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured and tested to highest standards\u003c\/li\u003e\n\u003cli\u003eBest in class range and signal quality\u003c\/li\u003e\n\u003cli\u003eExtra compact and low weight\u003c\/li\u003e\n\u003cli\u003eUltrasonic welded and foam infused cover for ultimate crash-protection\u003c\/li\u003e\n\u003cli\u003eDouble-jacket semi-rigid cable for heavy impact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTECHNICAL SPECIFICATIONS:\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 5500-6000MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 1.26dbic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxial Ratio:\u003c\/strong\u003e   0.74\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e RG402 (heavy duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e11.5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 85mm, 3.3 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e SMA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TBS","offers":[{"title":"RHCP (Right Hand Circular Polarized)","offer_id":27421858049,"sku":"A9","price":20.0,"currency_code":"USD","in_stock":false},{"title":"LHCP (Left Hand Circular Polarized","offer_id":37602730753,"sku":"A10","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/aohyhqM.jpg?v=1527240165"},{"product_id":"vas-right-hand-mad-mushroom-antenna-upgrade","title":"VAS Right-Hand Mad Mushroom Antenna Upgrade","description":"\u003cp\u003eThe Right-hand Circular Polarized Mad Mushroom antenna by Video Aerial Systems for the Tiny Whoop!\u003c\/p\u003e\n\u003cp\u003eThe Mad Mushroom has 5 lobes instead of 3 - making it a touch heavier but with a much higher axial ratio and a higher gain. For those willing take on the added weight of 2 antenna lobes, the reward will be the best video signal a Tiny Whoop can transmit. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVideo Aerial Systems has by far the highest quality control in the market, and tests each antenna individually. These antennas are made of bent wire, as opposed to the stamped metal antennas that come with most Tiny Whoop antennas. They are slightly larger than the stock antennas to make them a true 5.8GHz antenna, and they are considerably more durable - normal crashes will no longer break the lobe where it meets the mast.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003eWhen I modded my cam to use this antenna I added 0.93g overall. With upgraded motors, this is an excellent option for those dedicated to making Tiny Whoop videos, those flying in difficult RF environments, and for those looking for the clearest picture for the most immersive Tiny Whoop experience. \u003c\/p\u003e\n\u003cp\u003eModifying the antenna is pretty easy.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere's how:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14489582_10210319009747684_1050735765_o_large.jpg?v=1475361343\" alt=\"\" width=\"475\" height=\"355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirst, de-solder the current antenna from the vtx. Take a look at how it's held on in three places - there are two outside connections which are the ground (soldered to the same pad on either side) and there is a single lower connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14522529_10210319006867612_9977937_o_large.jpg?v=1475361147\" alt=\"\" width=\"475\" height=\"357\"\u003e\u003c\/p\u003e\n\u003cp\u003eNow we'll make the upgrade antenna look like that. First cut your antenna about this short. If you want a little room to make mistakes, go a couple millimeters longer.\u003c\/p\u003e\n\u003cp\u003eGently remove the outermost translucent material to expose the woven ground wire. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/Untitled_large.png?v=1475362681\" alt=\"\" width=\"475\" height=\"316\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce the outermost translucent layer is removed, slowley pull apart the woven ground wire and twist it into the two outside connections. As you'll see these will need to be a bit shorter than the central wire. Remove a bit of the white insulation between the core wire and the woven ground wire so that it looks like this.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14536493_10210319005547579_1443663104_o_large.jpg?v=1475363176\" alt=\"\" width=\"475\" height=\"341\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow just solder the central wire to the lower pad and the two ground twists to the ground pad. Easy as pie!! Just make sure they're not touching in any place and you should be good.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":27851907713,"sku":"A7","price":13.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14803309_10157604505035371_1501037050_o.jpg?v=1492703832"},{"product_id":"vas-crosshair-receiver-antenna-upgrade","title":"VAS Crosshair Receiver Antenna Upgrade","description":"\u003cp\u003eThe Tiny Whoop, because it needs to stay very light, is usually limited to a 25mw video transmission. To get more range out of your video signal you can upgrade your goggles\/groundstation antennas. \u003c\/p\u003e\n\u003cp\u003eThe Crosshair antenna is a 10dbic directional antenna with exceptionally high axial ratio (.98). Suitable for long distance transmission where range and object penetration are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGain: \u003c\/strong\u003e10dbic\u003cbr\u003e\u003cstrong\u003eAxial Ratio: \u003c\/strong\u003e.98\u003cbr\u003e\u003cstrong\u003eBeam width:\u003c\/strong\u003e 115 degrees\u003cbr\u003e\u003cstrong\u003e-3db point: \u003c\/strong\u003e+\/- 35 degrees\u003cbr\u003e\u003cstrong\u003ePolarization:\u003c\/strong\u003e Right Hand Circular (RHCP)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage includes:\u003c\/strong\u003e 1- Crosshair Antenna, 1- 45degree SMA Adapter, 1- VAS Finger Wrench\u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":27852069761,"sku":"A10","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14800159_10157604560560371_285425236_o.jpg?v=1492190792"},{"product_id":"vas-crosshair-receiver-antenna-upgrade-1","title":"VAS Pepperbox Receiver Antenna Upgrade","description":"\u003cp\u003e\u003cspan\u003eThe Tiny Whoop, because it needs to stay very light, is usually limited to a 25mw video transmission. To get more range out of your video signal you can upgrade your goggles\/groundstation antennas. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis is the best antenna for goggles\/groundstation I have found. It can punch thru multiple walls and dense foliage. If you use this antenna on your goggles. You'll have to get used to positioning your head such that your antenna points in the proper direction, but it's easy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the long range wanderer, the Pepperbox offers both high gain (13dbic) as well as wide beam width (180 degrees!). No antenna tracker is necessary for this antenna. Just aim in the general direction you intend to fly and go without worrying about aiming the antenna! Vertical coverage on this antenna is somewhat limited (only 60 degrees) so it is not suitable for high altitude runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eGain:\u003c\/strong\u003e 13dbic\u003cbr\u003e\u003cstrong\u003eAxial ratio:\u003c\/strong\u003e 1.0\u003cbr\u003e\u003cstrong\u003eBeam width:\u003c\/strong\u003e 160 degrees\u003cbr\u003e\u003cstrong\u003eBeam height:\u003c\/strong\u003e 60 degrees\u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":27852160065,"sku":"ANT42","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/14796059_10157604559510371_1381132369_o_1.jpg?v=1527240196"},{"product_id":"vas-t-style-dipole-antenna","title":"VAS T-Style Dipole Antenna","description":"\u003cp\u003eThe VAS T-Style Dipole, also known as the \"True Dipole,\" is the lightest dipole antenna in the world for the Tiny Whoop. Weighing in at  0.3 grams, this antenna has a slightly higher gain (2.2dbi) than the usual Tiny Whoop dipole and is more effecient - 98.7 percent as opposed to the 91-92 percent efficiency of the standard dipole, which translates to more range. Because of the short feed line this antenna is intrinsically balanced. Leave it to Video Aerial Systems to continue improving Tiny Whoop antenna equipment!!\u003c\/p\u003e\n\u003cp\u003eWe give you lots of coaxial length to work with on this antenna, but to get weight down, you'll have to trim it nice and tight, like all TW video antennas should be. Here's a video showing how I make the easy installation!\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/DKHyjZrGHGI\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eCaution! Do not cut this antenna too short - leave at least 8mm length to be sure the tip of the antenna doesn't get too hot while soldering this to your vtx.\u003c\/p\u003e\n\u003cp\u003eHere are some more photos and instruction if you prefer:\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eHere's how:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14489582_10210319009747684_1050735765_o_large.jpg?v=1475361343\" alt=\"\" width=\"475\" height=\"355\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirst, de-solder the current antenna from the vtx. Take a look at how it's held on in three places - there are two outside connections which are the ground (soldered to the same pad on either side) and there is a single lower connection.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14522529_10210319006867612_9977937_o_large.jpg?v=1475361147\" alt=\"\" width=\"475\" height=\"357\"\u003e\u003c\/p\u003e\n\u003cp\u003eNow we'll make the upgrade antenna look like that. First cut your antenna about this short. If you want a little room to make mistakes, go a couple millimeters longer.\u003c\/p\u003e\n\u003cp\u003eGently remove the outermost translucent material to expose the woven ground wire. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/Untitled_large.png?v=1475362681\" alt=\"\" width=\"475\" height=\"316\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOnce the outermost translucent layer is removed, slowley pull apart the woven ground wire and twist it into the two outside connections. As you'll see these will need to be a bit shorter than the central wire. Remove a bit of the white insulation between the core wire and the woven ground wire so that it looks like this.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/14536493_10210319005547579_1443663104_o_large.jpg?v=1475363176\" alt=\"\" width=\"475\" height=\"341\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow just solder the central wire to the lower pad and the two ground twists to the ground pad. Easy as pie!! Just make sure they're not touching in any place and you should be good.\u003c\/span\u003e\u003c\/p\u003e","brand":"VAS","offers":[{"title":"Default Title","offer_id":31006578113,"sku":"VASDIPOLE","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/IMG_6894.JPG?v=1492704906"},{"product_id":"optional-color-prop-set","title":"BLADE 31mm 4-blade 0.8mm Shaft - Optional Color Prop Set","description":"\u003cp\u003eJust like the original props but 3 colors all in one set!  \u003c\/p\u003e\n\u003cp\u003eWhether you want to mix and match these green, orange, and blue props, or just play with them in the tub(if you haven't tried it... do it!...hours of entertainment!)\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese props are made to fit motors with 0.75-0.8mm shafts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blade","offers":[{"title":"Default Title","offer_id":34004959681,"sku":"PX023","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/IMG_7551.JPG?v=1527240129"},{"product_id":"cockroach-super-durable-frame","title":"Brushed Cockroach65 Frame - Now With Colors!","description":"\u003cp\u003eAptly named for its COCKROACH indestructibilities, this frame is light weight and can take a serious beating!  Seriously we tried to break a couple and it didnt go well for us!\u003c\/p\u003e\n\u003cp\u003eThe color variants in the drop-down menu are for dyed frames. \u003cstrong\u003eDyed frames are a tiny bit lighter than painted cockroach frames, but are known in the community to be more brittle than an un-dyed frame, like any clear or painted cockroach\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp\u003eThis frame doesn't quite fit the carbon fiber stiffener brace we also sell. luckily there is no need for it.\u003c\/p\u003e\n\u003cp\u003eAt a great price point, who wouldn't want to have this as their backup frame or next Tiny Whoop platform!!! \u003c\/p\u003e\n\u003cp\u003eWeight: 3.39g    With Packaging: 22.6g\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Newbeedrone","offers":[{"title":"Clear","offer_id":35184348801,"sku":"R321","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":5782680076317,"sku":"R322","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Magenta","offer_id":5782683451421,"sku":"R323","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":5782687645725,"sku":"R324","price":3.99,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":5782689251357,"sku":"R325","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":18229045559392,"sku":"R326","price":3.99,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":18237520445536,"sku":"R327","price":3.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/IMG_7853.JPG?v=1527934601"},{"product_id":"ludicrous-speed-motors","title":"Ludicrous Motors - 6x17mm 25000kv - Tiny Whoop","description":"\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #00ff00;\"\u003eL\u003c\/span\u003e\u003cspan style=\"color: #9900ff;\"\u003eU\u003cspan style=\"color: #0000ff;\"\u003eD\u003c\/span\u003e\u003c\/span\u003eI\u003cspan style=\"color: #ff0000;\"\u003eC\u003c\/span\u003e\u003cspan style=\"color: #00ff00;\"\u003eR\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003eO\u003c\/span\u003e\u003cspan style=\"color: #9900ff;\"\u003eU\u003c\/span\u003eS SPEED GO!!!\u003c\/strong\u003e  We've been waiting for the next crazy motors to hit the market, and what we have here is beyond crazy.  25000kv means more power than any 6mm Whoop on the planet. It's crazy.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xwVMiqMGBcc\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eAs these motors are 2mm taller, they must be used on the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/frames\/products\/cockroach-super-durable-frame\"\u003eCockroach frame\u003c\/a\u003e with a small modification. The motor stop tips at the base of the motor mounts in the frame need to be removed which allows the motors to go all the way into the frame and fit flush with the height of the ducts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI fly these motors on a build with an Inductrix FPV board as well as on a build with a BeeBrain v1. On the FPV board you will notice some oscillations depending on your build, especially at low throttle with HV batteries. To get an idea what these oscillations look like at speed, check out the video below. At a hover, it'll shake a bit, but at high throttle it will scream. On a Betaflight FC like the BeeBrain, you'll be able to tune out oscillations by adjusting the PIDs. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThese motors are really pushing it for the Tiny Whoop power system!\u003c\/strong\u003e In addition to having a shorter lifespan, they \u003cstrong\u003eMUST be allowed to cool between flights\u003c\/strong\u003e. If you fly back to back batteries on these motors they can seize and sustain irreparable damage. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGrab a set and tell all your friends to watch for the plaid contrails!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e!!!WARNING plaid contrails will only be visible in your imagination!!!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTo get the most out of these motors I recommend you break them in by hovering for 10 minutes of flight time. Then go LUDICROUS!!!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chaoli","offers":[{"title":"Default Title","offer_id":37792910913,"sku":"M409 in with the betaFPV brushed motors","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/ludicrous.jpg?v=1529659753"},{"product_id":"tiny-whoop-led-headlights","title":"Tiny Whoop LED Headlights!!","description":"\u003cp\u003eA whole new world has just opened up for the Tiny Whoop Community.  With these blinding headlights, you can now see in total darkness! \u003c\/p\u003e\n\u003cp\u003eCheck out this awesome video by Scott Keatts, one of Tiny Whoop's sponsored pilots flying with a headlight.\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/nga_KgekIsU\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eWeight .35 grams  \u003c\/p\u003e\n\u003cp\u003eLength: 14.5cm\/5.7 inches\u003c\/p\u003e\n\u003cp\u003eEach LED includes a presoldered resistor which regulates the voltage so you can solder direct to the battery leads on the FC. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendations:\u003c\/strong\u003e If you are using a clear frame like the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/frames\/products\/cockroach-super-durable-frame\"\u003eCockroach\u003c\/a\u003e or the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/frames\/products\/original-stock-airframe-reinforced\"\u003eReinforced Stock Frame\u003c\/a\u003e you want to place these facing forward on one of the front outside ducts. If you mount a headlight over the camera it will blow out your ducts.  If you are using the \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/frames\/products\/inductrix-fpv-pro-airframe\"\u003eblack FPV Pro frame\u003c\/a\u003e you can mount it right on the plastic strut between the ducts.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eWarning: These are extremely bright and prolonged exposure can damage your eyes!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ED","offers":[{"title":"White","offer_id":1428466368541,"sku":"WhiteHead","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":3098976976925,"sku":"HL-Y","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":3099033403421,"sku":"HL-O","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":1428466434077,"sku":"RedHead","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Ultra Violet","offer_id":3098940964893,"sku":"HL-V","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":3099006337053,"sku":"Hl-BL","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":3099057946653,"sku":"HL-G","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Pink","offer_id":19311298478176,"sku":"HL-P","price":3.75,"currency_code":"USD","in_stock":false},{"title":"Ice Blue","offer_id":19312798302304,"sku":"","price":3.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/white_blue_red_yellow.jpg?v=1527240179"},{"product_id":"tbs-triumph-antenna-rhcp-lhcp-rp-sma","title":"TBS Triumph Antenna - RHCP - **RP-SMA**","description":"\u003cp\u003e\u003cstrong\u003e**THIS IS THE RP-SMA VERSION OF THE TRIUMPH! Double check to make sure you've got the right connector with the picture below! These work great with the TinyGoggles and many receivers, but not all! \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/antennas\/products\/tbs-triumph-antenna-sma\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick here for the SMA version\u003c\/a\u003e**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn all my whoopings, this antenna has stood out as having the best reception I've seen when used on your goggles or video receiver. Whenever I fly I try to have another set of goggles or a screen to make friends and show off, and if i'm using a Triumph (and I always do) and my \"passengers\" use any other antenna, they are always astonished that I can stay in the air in spite of losing video at longer ranges. The truth is I have much, much better video with this antenna than all other antennas, save the very high-end antennas like the pepper-box.\u003c\/p\u003e\n\u003cp\u003eThese antennas sell everywhere on the internet in sets of 2 for 40 bucks. Because Tiny Whoop pilots need only one antenna (for the goggles or reciever\/groundstation) I requested permission to sell them indivudually at half the cost of the set- hence the 20 bucks per antenna.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHere's what Team Black Sheep has to say about this little gem:\u003c\/p\u003e\n\u003cp\u003eWhile other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep have come together to re-invent how the modern 5.8 circular polarized antenna should look and perform.\u003c\/p\u003e\n\u003cp\u003eIn our quest for the cleanest video signal and best range possible, we have ventured way beyond the traditional bent lobes of Cloverleaf designs and invested significant time and effort in finding the best antenna designs known to man, and modifying them specifically for FPV use. \u003c\/p\u003e\n\u003cp\u003eAfter extensive design and testing, we focused on making  sure the Triumph was durable enough to take even the toughest of abuse. After many test flights and extensive feedback from our pilots, we decided to use a double-jacket heavy duty Semi-Rigid cable and tin-plated connectors. For protection we created a special foam-filled and ultrasonic welded enclosure to secure the antenna from inbound trees, or other objects :)\u003c\/p\u003e\n\u003ch1\u003eFEATURES:\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eManufactured and tested to highest standards\u003c\/li\u003e\n\u003cli\u003eBest in class range and signal quality\u003c\/li\u003e\n\u003cli\u003eExtra compact and low weight\u003c\/li\u003e\n\u003cli\u003eUltrasonic welded and foam infused cover for ultimate crash-protection\u003c\/li\u003e\n\u003cli\u003eDouble-jacket semi-rigid cable for heavy impact resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eTECHNICAL SPECIFICATIONS:\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 5500-6000MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 1.26dbic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxial Ratio:\u003c\/strong\u003e   0.74\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e RG402 (heavy duty)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight: \u003c\/strong\u003e11.5g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 85mm, 3.3 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e RP-SMA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake sure you've got the right connector! These antennas are RP-SMA, and work with the Tiny Goggles and lots of other receivers, but not all. If you have a standard Fatshark module, you'll want \u003ca href=\"https:\/\/www.tinywhoop.com\/collections\/antennas\/products\/tbs-triumph-antenna-sma\"\u003eTHIS VERSION\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/33965063_10160361504525371_7080457572632756224_n_large.jpg?v=1527640494\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e","brand":"TBS","offers":[{"title":"RHCP (Right Hand Circular Polarized)","offer_id":8662085566584,"sku":"ANT51","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/34035975_10160361508140371_6577293259029086208_n.jpg?v=1557869464"},{"product_id":"plum-sauce-motors-6x15mm-21800kv","title":"Plum Sauce Motors - 6x15mm 21800kv","description":"\u003cp style=\"text-align: center;\"\u003eIntroducing a new level of speed for the ultralight 6x15mm motors. \u003c\/p\u003e\n\u003cp\u003eWhile these motors are slightly less effecient than other 0615 motors, they're extremely powerful. It definitely takes some getting used to - the very high top speed means less throttle resolution when you're in a hover or moving slowley thru tree branches or people, so you might want to consider a throttle curve or just use these motors for acro or high-speed Whooping. \u003c\/p\u003e\n\u003cp\u003eThese motors do NOT work well with the Inductrix FPV flight controller, which is standard in the Tiny Whoop Racer. They're just too fast, and cause strange oscillations. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo get the most out of these motors I recommend you break them in by hovering for 10 minutes of flight time. Then go nuts.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Chaoli","offers":[{"title":"Default Title","offer_id":12422154813557,"sku":"M407","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/39594160_241667433219811_7284094045289185280_n.jpg?v=1535103165"},{"product_id":"happymodel-es24tx-pro-elrs-2-4ghz-rc-transmitter-module","title":"HappyModel Micro 2.4GHz ES24TX Express LRS TX Module","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003eCheck this plug and play option out for LRS protocols! This Micro TX is designed by Happymodel and based on the open-source- ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and SX1280 RF chip. The ES24TX module is a complete solution that is already pre-load the Expresslrs firmware and its plug and play.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.happymodel.cn\/index.php\/2021\/04\/10\/elrs-rx-tx-firmware-for-happymodel-elrs-es24tx-pp_rx-ep1_rx-ep2_rx-stock-firmware-out-of-factory\/\"\u003e\u003cspan style=\"color: #0054ff;\"\u003eFirmware Download\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRegulatory Domain: ISM2400\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMCU: ESP32 and ESP8285\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRF chip: SX1280IMLTRT\u003c\/li\u003e\n\u003cli\u003eFrequency Range: 2400 MHz to 2500 MHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum receive refresh rate: 500Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMinimum receiver refresh rate: 25Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRF Output Power: 10dBm~24dBm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower supply voltage: 5v~10v\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 9.5gram(without antenna）\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: 55.5mm*39.5mm*8mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAntenna gain:1.87dBi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eIncludes\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x EX24TX Module\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x 24TX80 Antenna\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x JR Bay Protective Case\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-mce-fragment=\"1\"\u003e1x Antenna Adapter Cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIf your looking for the \u003ca href=\"https:\/\/www.tinywhoop.com\/products\/happymodel-es24tx-pro-elrs-2-4ghz-rc-transmitter-module-1?_pos=2\u0026amp;_sid=eb756b564\u0026amp;_ss=r\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ePro ELRS click here\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":42126856552612,"sku":"TX03","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/Micro2.4ELRS24.jpg?v=1651198139"},{"product_id":"happymodel-mobeetle6-tiny-whoop-canopy","title":"Happymodel Mobeetle6 Tiny Whoop Canopy","description":"\u003cp\u003eThe all new hyper light whoop canopy is now here as a stand alone product! Add it to your custom race whoop or fix that mobeetle your dog ate. At .65 grams you'll struggle to find a lighter canopy that's this rigid and jello free.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eBrand: Happymodel\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eItem Name: Camera Mount\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eMaterial: 3D Printing TPU\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eWeight: 0.58g\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eLength: 52mm\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eColor: Red\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eAppplication: Compatible for Mobeetle6\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e1x Camera Mount\u003c\/p\u003e","brand":"EXTINCT","offers":[{"title":"Default Title","offer_id":42663092027556,"sku":"CNPY53","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/2b201038-e11d-41c2-bce9-24b0c1198b94_jpg.webp?v=1661876695"},{"product_id":"tinywhoopmotoroil","title":"Tiny Whoop Motor Oil","description":"\u003cp style=\"text-align: center;\"\u003eTiny Whoop Motor Oil is HERE!\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e~*~ WHOOP LUBE ~*~\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ca href=\"https:\/\/www.tinywhoop.com\/products\/tiny-whoop-motor-oil-patch\" target=\"_blank\"\u003eClick here for the Tiny Whoop Motor Oil Patch!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eWe've been using this stuff at Tiny Whoop HQ for years with all brushless motors. Tiny Whoop Motor Oil is a clear, non-staining, ultra-lightweight premium oil that improves motor lubrication, which can really make a difference to performance, especially on heavily used motors. I can feel and hear a difference after I oil a well-used set of motors!\u003c\/p\u003e\n\u003cp\u003eTo apply Tiny Whoop Motor Oil, I turn the aircraft over and place a fraction of a drop on the center of the bottom of each motor. Next I spin the motor around while upsidedown several times so the oil can get worked down into the bearing or bushing, lubricating any possible friction points. Afterwards I always use a paper towl to try to get any excess oil outa there. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eIf you're not happy with the performance of Tiny Whoop Motor Oil, just email me at orders@tinywhoop.com and I'll give you your money back. \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor use ONLY with Tiny Whoop brushless motors. Keep out of reach of children. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eINCLUDES:\u003c\/p\u003e\n\u003cp\u003e0.5 Ounces of TW Motor Oil (maybe a lifetime supply?)\u003c\/p\u003e\n\u003cp\u003eNOT INCLUDED - \u003ca href=\"https:\/\/www.tinywhoop.com\/products\/tiny-whoop-motor-oil-patch\" target=\"_blank\"\u003eThe Tiny Whoop Motor Oil Patch!\u003c\/a\u003e\u003c\/p\u003e","brand":"Tiny Whoop","offers":[{"title":"Default Title","offer_id":42772715700388,"sku":"T09","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/products\/main_27802fb1-70aa-480a-87bd-bec95844d25d.png?v=1664305346"},{"product_id":"mobula6-freestylehd-canopy-for-hdzero-lux-camera","title":"Mobula6 or 7 FreestyleHD Canopy for HDZero Lux Camera","description":"\u003cp\u003eThis is a replacement camera mount for the Happymodel Mobula6 FreestyleHD BNF, for use with the HDZero Lux Camera. The Camera angle is 30 degrees or so.\u003c\/p\u003e\n\u003cp\u003eIncludes the canopy and 4 screws to mount it.  \u003c\/p\u003e\n\u003cp\u003eAccording to the legendary Tiny Whoop Milligram Scale this thing weighs exactly 0.3922g without 4 included screws, and 0.6131g with the metal hardware.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":50572084445348,"sku":"CNPY44","price":4.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1368\/1453\/files\/1000010118.png?v=1733260948"}],"url":"https:\/\/www.tinywhoop.com\/collections\/parts-and-accessories\/propeller.oembed","provider":"Tiny Whoop","version":"1.0","type":"link"}