The Mobula 6 has become one of the most common pre-built Tiny Whoop style aircraft on the market. It's fast, lightweight, agile, and really fun to fly! It's got the Runcam Nano 3 onboard for excellent wide field fo view with an adjustable camera angle so you can customize your view to your flying style!
I'm selling the version with 19000kv motors, as the other version has a strong reputation of having very short flight times and unreliable motors. You're gonna love this aircraft! It's available with either FRSKY or DSMX compatible recievers, check out these specs:
Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless whoop only 20g
Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
Smooth and powerful
Compatible for 1S Lipo/LIHV
Camera Angle adjustable
Specifications:
Brand Name: Happymodel
Wheelbase: 65mm
Size: 80mm*80mm*37mm
Net weight: 20g(without battery)
Takeoff weight: 28g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
External SPI DSM2/DSMX version(Compatible with SPEKTRUM DSM2/DSMX protocol radio transmitter) installed
Motor speed: 19000kv 802
Package includes:
Item Name | Qty |
Mobula6 1S 65mm whoop Drone Frame | 1 |
SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX | 1 |
SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX | |
SPI Receiver Option3: CrazybeeX DXS V1.0 FC built-in DSM2/DSMX SPI RX | |
SE0802 KV19000 brushless motor | 4 |
Gemfan 1219-3 Propellers(4cw+4ccw) | 1 |
Runcam Nano3 1/3 CMOS 800TVL camera | 1 |
5.8G 25mw 40ch vtx (Flight controller built-in) | 1 |
1S 300mah 30C LiHV Battery | 4 |
1S Lipo/LIHV USB Charger | 1 |
Propeller disassemble tool | 1 |
Spare parts specifications:
Motor | Mode: SE0802 19000KV or KV25000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only |
Propellers | Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.28g |
Flight controller | (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS (DSM2/X SPI RX version) CRAZYBEEX DXS DSM2/X version firmware target: CrazybeeF4DXS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection |
Onboard 4in1 ESC | MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Frsky/Flysky version Factory firmware: O_H_5_REV16_7.HEX DSM2/DSMX version Factory firmware:S_H_50_REV16_8.HEX Default protocol: DSHOT600 |
Onboard Frsky SPI D8 receiver Version | SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m |
Onboard DSM2/DSMX SPI receiver Version | SPI BUS receiver DSM2/DSMX compatible Channels: Max 12ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m RSSI enable(show on the goggles) |
Onboard 5.8g VTX | Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready |
Runcam Nano3 | Model: RunCam Nano 3 Image Sensor: 1/3″ CMOS Horizontal Resolution: 800TVL Lens : 2.3mm(M6.5) FOV 140° Signal System: NTSC S/N Ratio: >50dBElectronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm |
Lipo Battery | Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8gConnector: PH2.0 |