You can pick up extra propellers HERE
Features
- X12 AIO flight controller w/ built-in 2.4G ELRS V2.0 and OPENVTX
- VTX Power up to 400mw
- ELRS V2.0 (Default), provides firmware to support ELRS V3.0
- Smooth and powerful
- Compatible with 1S-2S Lipo/LIHV battery
Recommend 2S 450mah/550mah/650mah battery (Not included)
Specifications
- Brand Name: Happymodel
- Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone
- Wheelbase: 85mm
- Size: 120mm*120mm*50mm
- X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTX
- VTX Power up to 400mw
- ELRS V2.0 (Default), provides firmware to support ELRS V3.0
- EX1103 KV110000 motors
- CaddxFPV Ant FPV camera
- Weight: 43g
AIO Flight Controller
- X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
- X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FR
- X12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: ICM20689 or ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) BLHeli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw
- Built-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2A
- Built-in voltage detection
- Built-in current sensor
AIO 4-in-1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Firmware target: Z_H_30
- Default protocol: DSHOT300
- Support Bluejay firmware
Receiver option:
- 2.4G ELRS SPI(Support ELRS v2.0, provide firmware could compatible with elrs v3.0)
- SPI Frsky D8/D16 not compatible with EMAX E6 radio
- PNP (without onboard receiver)
- TBS version(with external TBS CRSF NANO RX)
Motor
- Mode: EX1103 KV11000
- Configuration: 9N12P
- Stator Diameter: 11mm
- Stator Length: 3mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
- Weight(g): 3.8g
- No. of Cells(Lipo): 1-2S
Propellers
- Weight: 0.88g
- Material: PC
- Pitch: 2.3inch
- Props Diameter: 52.17mm
- Center Thickness: 5mm
- Center Hole Diameter: 1.5mm
Caddx ANT 1200TVL Camera
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Recommended (Not Included)
- 2S 450mah/550mah/650mah battery (Not included)
Includes
- 1 x Happymodel Mobula8 1-2S 85mm Analog Micro FPV Whoop Drone - Chosen Receiver
- 1 x Gemfan Hurricane 2023 tri-blade propellers (4CW+4CCW)
- 1 x Screw Driver
- 1 x Extra camera canopy
