Happymodel TCXO ExpressLRS 2.4GHz Nano Receiver - EP1

$37.49


Delivery and Shipping

Add some general information about your delivery and shipping policies.

The Happymodel EP1 TCXO RX is a nano-sized true diversity 2.4GHz ELRS receiver with RF amps. This TCXO Rx receiver uses a temperature-compensated crystal oscillator to help with accurate MCU clock frequency, thus improving the performance and reliability of your RC link. Despite the small size, the low latency and high refresh rate of the ELRS system allow this receiver to be used on full-size/long-range quads, while also being small enough to be used on whoop-size quads! The Happymodel EP1 RX includes an IPEX connector for a dipole antenna, while the EP2 RX includes a built-in SMD antenna.

The EP1, EP2, and EP1 Dual modules are based on the ESP8285 MCU that allows for upgrading via WiFi, along with the SX1280(SX1281)IMLTRT RF Module.


Features

  • Excellent performance in extreme temperatures
  • Uses a temperature-compensated crystal oscillator
  • Includes an IPEX connector for a dipole antenna
  • ESP8285 MCU 
  • High-refresh-rate RF module
2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver

Specifications

  • Type: ISM2.4GHz
  • ESP8285 MCU
  • SX1280(SX1281)IMLTRT RF Module
  • Omni directional antenna
  • Frequency Range: 2400 MHz to 2500 MHz
  • Receive refresh rate: 25HZ~500Hz
  • Working voltage: 5v
  • Weight: 0.41 gram(without antenna)
  • Dimension: 10mm*10mm*6mm
  • Peak gain: 2.23dB

Firmware

  • Default Firmware out of the factory: HappyModel_EP_2400_RX V2.2 version
  • Built-in a TCXO (temperature-compensated crystal oscillator)

Includes

  • 1x Happymodel ExpressLRS Nano 2.4GHz EP1 TCXO RX w/ Soldered Antenna
  • 1x Antenna
Happymodel

Happymodel TCXO ExpressLRS 2.4GHz Nano Receiver - EP1

$37.49

The Happymodel EP1 TCXO RX is a nano-sized true diversity 2.4GHz ELRS receiver with RF amps. This TCXO Rx receiver uses a temperature-compensated crystal oscillator to help with accurate MCU clock frequency, thus improving the performance and reliability of your RC link. Despite the small size, the low latency and high refresh rate of the ELRS system allow this receiver to be used on full-size/long-range quads, while also being small enough to be used on whoop-size quads! The Happymodel EP1 RX includes an IPEX connector for a dipole antenna, while the EP2 RX includes a built-in SMD antenna.

The EP1, EP2, and EP1 Dual modules are based on the ESP8285 MCU that allows for upgrading via WiFi, along with the SX1280(SX1281)IMLTRT RF Module.


Features

  • Excellent performance in extreme temperatures
  • Uses a temperature-compensated crystal oscillator
  • Includes an IPEX connector for a dipole antenna
  • ESP8285 MCU 
  • High-refresh-rate RF module
2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver

Specifications

  • Type: ISM2.4GHz
  • ESP8285 MCU
  • SX1280(SX1281)IMLTRT RF Module
  • Omni directional antenna
  • Frequency Range: 2400 MHz to 2500 MHz
  • Receive refresh rate: 25HZ~500Hz
  • Working voltage: 5v
  • Weight: 0.41 gram(without antenna)
  • Dimension: 10mm*10mm*6mm
  • Peak gain: 2.23dB

Firmware

  • Default Firmware out of the factory: HappyModel_EP_2400_RX V2.2 version
  • Built-in a TCXO (temperature-compensated crystal oscillator)

Includes

  • 1x Happymodel ExpressLRS Nano 2.4GHz EP1 TCXO RX w/ Soldered Antenna
  • 1x Antenna
View product
×

A Message from Mr. Tiny Whoop

about Tariffs and Pricing

Hey everyone,

I’m speaking to you now both as a business owner and a member of the FPV family we've built together.

For almost ten years now, I’ve been doing everything I can to keep Tiny Whoop prices steady, even as costs started to rise. But with the newest wave of tariffs—more than doubling the cost of nearly every part we import from China—that fight has hit a wall.

Lots of you have already noticed some prices going up across the site. This isn’t a price hike to chase profit. It’s survival mode. Like everyone in the FPV industry right now, I’m facing a set of changes that hit fast and hard. Nearly everything we source from China now costs us more than double.

For an irresponsibly long time I ate the costs of the tariffs, but the math doesn’t work anymore without putting Tiny Whoop at serious risk.

So here’s what I want you to know:
Every price increase is a response to real, unavoidable costs.
Even with the price increases I’m taking a big hit.
When this pressure eases, I’ll roll back prices immediately.

If you have any questions or ideas it would mean a lot to hear from you!

We’re still shipping every day, still guaranteeing satisfaction on all orders. But this is the toughest moment Tiny Whoop has faced in nearly a decade.

Through all of this, my mission hasn’t changed. I’m still committed to helping people experience the gift of flight, to keeping TinyWhoop.com on the leading edge of innovation, and to making sure the magic of Tiny Whoop doesn’t get swallowed up by politics and global economics.

If you’ve been a part of this ride in any way, I am so, so grateful! Thank you for supporting Tiny Whoop, thank you for supporting my family, and thank you for being a part of this amazing community!

— Jesse Perkins
Founder, Tiny Whoop